International Journal of Industrial Engineering & Production Research
Iran University of Science & Technology
Sat, Jul 27, 2024
[Archive]
Volume 31, Issue 1 (IJIEPR 2020)
IJIEPR 2020, 31(1): 143-160 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Imanian M, Ghassemi A, karbasian M. A Novel Methodology for Monitoring and Control of Non Stationary Processes Using Model-Based Control Charts (Case Study: bottomhole Pressure during Drilling Operations). IJIEPR 2020; 31 (1) :143-160
URL: http://ijiepr.iust.ac.ir/article-1-827-en.html
URL: http://ijiepr.iust.ac.ir/article-1-827-en.html
1- Department of industrial engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran
2- Department of industrial engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran ,a_ghassemi@pmc.iaun.ac.ir
3- Department of industrial engineering, Malek-Ashtar University of Technology, Shahinshahr, Iran
2- Department of industrial engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran ,
3- Department of industrial engineering, Malek-Ashtar University of Technology, Shahinshahr, Iran
Abstract: (3155 Views)
This work used two methods for Monitoring and control of autocorrelated processes based on time series modeling. The first method was the simultaneous monitoring of common and assignable causes. This method included applying five steps of data gathering, normality test, autocorrelation test, model selection and control chart selection on all non-stationary process observations. The second method was a novel one for the separate monitoring and control of common and assignable causes. In this method, the process was divided into the parts with and without assignable causes.
The first method was greatly non-stationary due to not separating common and assignable causes. This method also implied that the common causes were hidden in the process. The novel method for the separate monitoring of common and assignable causes could turn the process into a stationary one, leading to identifying, monitoring, and controlling common causes without any interference from the assignable causes. The results showed that, unlike the first method, the second method could be very sensitive to the common causes; it could, therefore, suitably monitor, identify and control both assignable and common causes.
The current work was aimed to use control charts to monitor and control the bootomhole pressure during the drilling operation.
The first method was greatly non-stationary due to not separating common and assignable causes. This method also implied that the common causes were hidden in the process. The novel method for the separate monitoring of common and assignable causes could turn the process into a stationary one, leading to identifying, monitoring, and controlling common causes without any interference from the assignable causes. The results showed that, unlike the first method, the second method could be very sensitive to the common causes; it could, therefore, suitably monitor, identify and control both assignable and common causes.
The current work was aimed to use control charts to monitor and control the bootomhole pressure during the drilling operation.
Type of Study: Research |
Subject:
Statistical Process Control Statistical Process Control or Quality Control
Received: 2018/05/13 | Accepted: 2020/02/16 | Published: 2020/03/15
Received: 2018/05/13 | Accepted: 2020/02/16 | Published: 2020/03/15
Send email to the article author
| Rights and permissions | |
 | This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
