جلد 31، شماره 2 - ( 4-1399 )
جلد 31 شماره 2 صفحات 187-177 |
برگشت به فهرست نسخه ها
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Phate M, Toney S, Phate V. Investigation on the Impact of of Silicon Carbide and Process Parameters on Wire Cut-EDM of Al/SiCp MMC.. IJIEPR 2020; 31 (2) :177-187
URL: http://ijiepr.iust.ac.ir/article-1-937-fa.html
URL: http://ijiepr.iust.ac.ir/article-1-937-fa.html
Investigation on the Impact of of Silicon Carbide and Process Parameters on Wire Cut-EDM of Al/SiCp MMC.. نشریه بین المللی مهندسی صنایع و تحقیقات تولید. 1399; 31 (2) :177-187
چکیده: (4253 مشاهده)
In the present work, a model based on dimensional analysis (DA) coupled with the Taguchi method to analyze the impact of silicon carbide (SiC) has been presented. The wire cut electrical discharge machining (WEDM) performance of aluminium silicon carbide (AlSiC) metal matrix composite (MMC) has been critically examined. To formulate the DA based models, total 18 experiments were conducted using Taguchi’s L18 mixed plan of experimentation. The input data used in the DA models are a pulse on time, pulse off time, wire feed rate, % SiC, wire tension, flushing pressure etc. According to these process parameters, DA models for the surface roughness and the material removal rate was predicted. The formulated DA models have shown a strong correlation with the experimental data. The analysis of variance (ANOVA) has been used to find out the impact of individual parameters on response parameters.
نوع مطالعه: پژوهشي |
موضوع مقاله:
فرایندهای تولید و سیستم ها
دریافت: 1398/5/17 | پذیرش: 1398/12/3 | انتشار: 1399/4/7
دریافت: 1398/5/17 | پذیرش: 1398/12/3 | انتشار: 1399/4/7
| بازنشر اطلاعات | |
 | این مقاله تحت شرایط Creative Commons Attribution-NonCommercial 4.0 International License قابل بازنشر است. |
